Buy now: £4.99
Features:
The PDB-XT60 has been engineered to providethe highest possible performance and reliability.
It distributes power from a Lipo pack to 6 ECSc, as well as providing sybchronised regulated DC 5V outputs and linear regulated DC 12V output.
2oz copper to protect a large current, 4-layers 1.6mm PCB, high current power and BEC Stratification, avoid ground disturbance BEC power current.
Total 6 pairs ESC solder tabs, fit for H or X type frame, mounting hole suit for CC3D naze32 SP Racing F3 flight controller.
Built-in XT60 socket, you need to welded it on the sub-plate, LED indicators short circuit resistant.
Specifications:
General:
Input voltage range (3S-4S LiPo battery): 9 - 18V DC
Regulated 5V and 12V outputs
LED power indicators (5V & 12V outputs)
6 ESC outputs & 1 pair VCC/GND pads
ESC outputs:
Continuous current: 25A x 4 or 15A x 6
Peak current (10 seconds/minute): 30A x 4 or 20A x 6
BEC 5V output:
Designed for RC receivers, flight controllers, OSD, and servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2A (Max.2.5A 10s/minute)
Output ripple: 40mV (VIN=16V, VOUT=5V@2A load)
Short-circuit tolerant (5 seconds/minute)
BEC 12V output:
Designed for video TX or FPV camera with linear regulator.
The battery should be 4S LiPo (13-18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant (2 seconds/minute)
BEC 12V @ 3S LiPo
Output voltage= 3S LiPo voltage -1V
Mounting: 30.5 x 30.5mm, Φ3mm
Dimension: 52 x 36 x 3mm (w/o XT60)
Package includes:
1 x XT60 PDB with dual BEC
1 x XT60
