Buy now: £26.40
Hobbex Catenary: 5-wires each with 350mm length, track G or Spur1 Article ZR-OG314 The contact wires are made of brass for outdoor use. They can also be shortened. Zenner holds both contact wires made of brass as copper plated iron in the lengths 600 and 300mm in stock. The increment can be produced from 600 mm contact wires. but Hobbex has other lengths. The contact wires are suitable for LGB, Piko and other manufacturers of G scale, but also for Märklin Spur1. For 6 route masts you need a 5-wires The construction in lane 1 is suitable for 20mm high dams. As suitable outdoor terrace Diehlen plastic. The mast is thus lower than the Diehle. In track G of the pole must be installed in the plane of the track pad to obtain the correct height, so in our example on the terrace Diehle. Installation note: Hobbex a video to show how a pole with contact wires is built. Without first fixed poles, the assembly of the contact wires is difficult. If you try it, then the masts fall almost always. But you have to know where the poles are to be fixed exactly. As best help the contact wires even if only the masts would not fall over. One way is the yardstick and if something is wrong, cut an adaptation of the contact wire length by. Option 1) Much easier with poles with pole support, which are mounted between the thresholds, as with LGB. He is a spacer and cable carriers simultaneously for. It is an optional one of us and can be glued to the mast before assembling with the masts of you. It allows to make the structure easier and faster. The spacer and cable carrier of LGB is supplied with a Adicional spacer, which is already adhered. The mast can so before it is bolted to the floor, be optimally positioned with the contact wires to the tracks and no longer falls. This helps in assembling with the contact wires much because thus the position of the poles can be easily determined. When outdoors no screw fixing in the ground is possible, this pole support help. The spacer is only...
Buy now: £8.70 / £8.60